Replacing Your Fermod Door Handle: A Step-by-Step Guide

Is your door handle in need of a refresh? Whether it's worn out, or damaged or you simply want to update the look, fitting a new handle is a manageable DIY project. Here’s a handy guide to help you through the process:

1. Prepare Your Tools Before you begin, gather the necessary tools: a 17mm socket with an extension bar, a flat-headed screwdriver, an 8mm spanner, and a wooden block.

How to Fit Fermod 67 Coldroom Door Gasket 

Simply remove the old gasket and fix the 67 gasket to the edges of the door using the pre-drilled retaining strip. The corners don't need anything too fancy. On the two upright pieces of the gasket cut away 40mm of the inner section, leaving the middle intact. The piece that runs across the top or head of the door can be cut square and slot into the rebate you have just created. Using the ends of the retaining strip to fix down where the two gaskets meet. Repeat at the bottom of the door if it is a four sided gasket.