Rivacold "BEST Easy" - Freezer Monoblock
Product Description
Rivacold BEST Easy Packaged Freezer Coldroom Unit - R290
Important Warranty Documentation: Please Read
What is BEST Easy?
The Rivacold BEST Easy is an indoor, wall-mounted monoblock refrigeration unit for coldrooms. It's the lower-cost version of Rivacold's BEST range: the same refrigeration hardware, sizes and capacities, but without the extras such as Bluetooth, the Rivacold app and remote monitoring. If you just need a unit to keep a room cold and don't need to check it from your phone, BEST Easy does the same job for less.
What does BYWT mean?
- BY: BEST Easy (full BEST models start BE)
- W: wall-mounted
- T: through-wall, fitted through an opening in the coldroom wall. BYWS is the saddle-mount version, which sits over the top of the wall.
All BEST Easy units run on R290 propane, with a charge of 150g or less per circuit. They're the modern replacement for Rivacold's older FA and FT Blocksystem units.
Through-wall refers to how the unit is mounted, not the electrics. It is not fitted with a 13 A plug and must be connected to a dedicated supply via a rotary isolator.
Key features:
- R290 propane refrigerant (150g charge or less per circuit)
- Through-wall installation
- ModBus and master/slave connection supported
- Alarm management built in
- Seven sizes to suit freezer rooms from 4.9m³ to 34.4m³
Not included on BEST Easy: Bluetooth, the Rivacold app, remote monitoring, pressure probes and leak alarm management. If you need remote monitoring or alarms on your phone, ask us about the full BEST range.
Specifications:
- Refrigerant: R290 propane, 150g or less per circuit
- Application: freezer (low temperature)
- Room size: 4.9m³ to 34.4m³ depending on model
- Power supply: single phase
- Weight: 48kg to 106kg depending on model
- Dimensions: see the data sheet for your model below
Replacing an old Rivacold FA or FT unit?
The cross-reference document below matches old FA and FT models to their BEST Easy replacement. It lists the saddle-mount BYWS codes. For these through-wall units, swap BYWS for BYWT: for example, BYWS301LA30P11 becomes BYWT301LA30P11. Some BEST Easy models are slightly lower in capacity than the unit they replace, so check the room load rather than swapping like for like.
Installation notice:
This unit must be correctly selected, installed, and commissioned by a trained and competent coldroom installation engineer or refrigeration engineer. Unit selection must be based on coldroom size, room usage, stock type, and stock rotation requirements, in accordance with manufacturer guidance and good refrigeration practice.
Incorrect unit selection or installation may result in poor performance and may invalidate the manufacturer's warranty.
Electrical installation notice:
A suitably rated independent 230V power supply to a rotary isolator is required. Electrical supply and connections must be installed by a trained and competent electrician in accordance with current UK wiring regulations and site-specific requirements.
Absolute Coldroom accepts no responsibility for on-site electrical works, power supply suitability, or incorrect electrical installation.
Warranty coverage:
- 12-month parts-only manufacturer's warranty
- Labour, refrigerant, and consequential losses (including stock damage) are not covered
- Installation and replacement part fitting costs are the responsibility of the customer
Returns policy:
- All returns subject to a 20% Rivacold restocking fee
- Returns must be pre-authorised and in original condition
Delivery information:
- Free delivery to UK mainland addresses
- Highlands, Islands, and remote areas may incur a surcharge
- Please contact Absolute Coldroom for delivery quotes outside the UK mainland
Additional resources:
- Important Warranty Documentation: Please Read
- Instruction manual: supplied with the unit
- BEST Easy overview and FA/FT cross-reference
- Technical catalogue (full BEST WS/WT range, same sizes and capacities as BEST Easy)
- All Rivacold manuals and downloads
Individual model data sheets:


