Rivacold Freezer Monoblock

£1,465.00


Rivacold Freezer Monoblock - FLT Range

Please Note that Stock Levels and Lead times are Currently Subject to Change.

Please Contact us with your enquiry

Work out the cubic capacity of your coldroom and select the correct unit using the information below. If your internal cubic capacity is very close to the limit suggested we recommend you opt for the next size up. 

All units are based on an maximum external ambient temperature of 32 degrees C. Minimum external ambient operating temperature is 15 degrees C.

 

 MODEL NUMBER COLDROOM VOL MAX  
POWER SUPPLY
FTL003G011 3.6 M3 16 AMP
FTL006G011 4.8 M3 16 AMP
FTL009G011 6.1 M3 16 AMP
FTL012G011 11.1 M3 20 AMP
FTL016G011 16.3 M3 20 AMP
FTL020G011 19.4 M3 20 AMP
FTL024G011 29.2 M3 32 AMP

The Rivacold Packaged Monoblock medium temperature units are ready to use and have been specially developed for small cold rooms. The Rivacold Monoblock units are quickly installed and give the best product storage conditions in terms of temperature and hygrometry.

The Rivacold Monoblock unit’s are built only from high reliability components. Self-supporting casing in zinc-plated metal sheet, which is coated with epoxy powder. The front panel is easy to remove in order to guarantee an easy access to the components and a fast maintenance. Hermetic compressors with thermal motor protection running on the latest refrigerants available.

The electronic control panel can be programmed according to different user requirements. The Rivacold packaged Block-system is contained in one compact housing, consisting of a condensing unit, evaporator and an electrical control panel. This solution enables the user a product which is easy to use and install with the maximum of installation versatility.

FA/FT Range for wall installation:
The FA versatility is highlighted in the dual mounting mode: saddle version (FA range) or plug-in insulating panel fitted version (FT range). Capillary expansion. Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).

Key Product Features:
Plug in insulation style installation
Automatic defrosting with programmable run, duration and frequency settings ”Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).”
Integral evaporating condensing water tray, or condensing water direct discharge
Electronic control panel
Cold room light with 2,5m long cable
Door micro switch with 2,5m long cable
Door heater cable for LBP items with 2,5m long cable
High pressure switch
Evaporating water tray
Power supply cable (L=2,5m)

Manufacturers Warranty:

12 Months Parts Only Warranty

Labour or consequential losses are not covered

Replacement parts fitting, refrigerant and stock losses are not covered

Free Delivery - 1-2 days lead time

Click Here for PDF of User Manual


More from this collection