Rivacold Chiller Monoblock

£1,469.00 Excl. VAT


Rivacold Chiller Monoblock - FTM Range

IMPORTANT DOCUMENT - PLEASE READ  - PDF

Please Note that Stock Levels and Lead times are Currently Subject to Change. Please contact us prior to ordering to check availability and lead times.

Images for reference only.

Free Delivery UK Mainland - Highlands & Islands will be subject to a carriage surcharge depending on postcode. Please contact us for a quotation.

Work out the cubic capacity of your coldroom and select the correct unit using the information below. If your internal cubic capacity is very close to the limit suggested we recommend you opt for the next size up. 

All units are based on an maximum external ambient temperature of 32 degrees C. Minimum external ambient operating temperature is 15 degrees C.

Cubic Capacity = WIDTH x DEPTH X HEIGHT
 MODEL NUMBER COLDROOM VOL MAX  
POWER SUPPLY
FTM003G001 4.6 M3 16 AMP
FTM006G001 6.0 M3 16 AMP
FTM007G001 7.9 M3 16 AMP
FTM009G001 10.6 M3 16 AMP
FTM012G001 11.1 M3 16 AMP
FTM016G001 16.4 M3 20 AMP
FTM022G001 19.8M3 20 AMP
FTM028G001 23.9M3 20 AMP
FTM034G001 31.1M3 20 AMP
FTM034G002 31.2M3 20AMP
FTM040G001 37.6M3 20 AMP
FTM040G002 37.6M3 32AMP

The Rivacold Packaged Monoblock medium temperature units are ready to use and have been specially developed for small cold rooms. The Rivacold Monoblock units are quickly installed and give the best product storage conditions in terms of temperature and hygrometry.

The Rivacold Monoblock unit’s are built only from high reliability components. Self-supporting casing in zinc-plated metal sheet, which is coated with epoxy powder. The front panel is easy to remove in order to guarantee an easy access to the components and a fast maintenance. Hermetic compressors with thermal motor protection running on the latest refrigerants available.

The electronic control panel can be programmed according to different user requirements. The Rivacold packaged Block-system is contained in one compact housing, consisting of a condensing unit, evaporator and an electrical control panel. This solution enables the user a product which is easy to use and install with the maximum of installation versatility.

FA/FT Range for wall installation:
The FA versatility is highlighted in the dual mounting mode: saddle version (FA range) or plug-in insulating panel fitted version (FT range). Capillary expansion. Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).

Key Product Features:
Plug in insulation style installation
Automatic defrosting with programmable run, duration and frequency settings ”Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).”
Integral evaporating condensing water tray, or condensing water direct discharge
Electronic control panel
Cold room light with 2,5m long cable
Door micro switch with 2,5m long cable
Door heater cable for LBP items with 2,5m long cable
High pressure switch
Evaporating water tray
Power supply cable (L=2,5m)

Manufacturers Warranty:

12 Months Parts Only Warranty

Labour or consequential losses are not covered

Replacement parts fitting, refrigerant and stock losses are not covered

IMPORTANT: 25% Rivacold Re-stocking fee on any returned units

Free Delivery UK Mainland - Highlands & Islands will be subject to a carriage surcharge depending on postcode. Please contact us for a quotation.

Click Here for PDF of User Manual


More from this collection